Xerox Versant 80 Press - Business Ready Finisher (BR Finisher); Business Ready Booklet Maker Finisher (BR Booklet Maker Finisher)22

Detailed Specifications Xerox
®
Versant® 80 Press
Customer Expectation and Installation Guide Xerox Confidential 22
Hole Punch Capacity by weight and paper finish
Paper type and weight Paper Size
B5 A4 / .5 x 11 in B4 / 8.5 x 14 in A3 / 11 x 17 in
Uncoated 52-220 gsm Applicable Applicable Applicable Applicable
Coated 106-220 gsm Applicable Applicable Applicable Applicable
Supported Stocks for the Finishing
Transport
When delivering sheets to a connected third-party finishing device, the Standard Finisher Plus can pass through
substrate sizes from 182 mm (7.16 in) to 488 mm
(19.2 in) in the process direction, and 182 mm (7.16 in) to 330.2 mm (13 in) in the cross-process direction, substrate
weights from 55-350 gsm (16 lb. Bond-130 lb. Cover).
Standard Finisher Plus Limitations
Productivity may be reduced by up to 50% when running multiple sets of a single sheet job to the Stack Tray, due to the
press being forced to wait while each single sheet set is ejected to the Stacker Tray.
Business Ready Finisher (BR Finisher)
The Business Ready Finisher includes:
 Multi-position Stapling
 Hole Punch
BR Finisher
Specifications
Feature Speci
f
ication (with centerline paper)
Top Tray Capacity 500 sheets of 8.5”x11” / A4, 20lb bond / 80 gsm uncoated paper. Accommodates up to 13”x19”/SRA3
size at 64-350 gsm.
Stacker Tray Capacity 3,000 sheets of 8.5”x11” / A4, 20lb bond / 80 gsm uncoated paper. Accommodates up to 13”x19”/SRA3
size at 64-220 gsm.
Paper weights 16 lb Bond to 100 lb Cover / 64 to 350 gsm
Maximum Paper Size SRA3 (13 x 19.2)
Stapling Up to 50 sheets uncoated / coated
Quad stitch available through EX-i/EX print servers.
Hole Punching NA – 2
–
3 hole punch
Europe – 2 – 4 hole punch
BR Finisher
Limitations
 Heavier weight stocks will result in reduced output tray capacity
Business Ready Booklet Maker Finisher (BR Booklet Maker Finisher)
The Business Ready Finisher includes:
 Multi-position Stapling
 Hole Punch
 Bi-fold
 Booklet Maker
 Saddle stitching Short Edge Feed (SED)
BR Booklet
Maker Finisher
Specifications
Feature Specification (with centerline paper)
Top Tray Capacity 500 sheets of 8.5”x11” / A4, 20lb bond / 80 gsm uncoated paper. Accommodates up to 13”x19”/SRA3
size at 64-350 gsm.
Stacker Tray Capacity 3,000 sheets of 8.5”x11” / A4, 20lb bond / 80 gsm uncoated paper. Accommodates up to 13”x19”/SRA3
size at 64-220 gsm.
Paper weights 16 lb Bond to 100 lb Cover / 64 to 350 gsm
Maximum Paper Size SRA3 (13 x 19.2)
Stapling Up to 50 sheets uncoated / coated
Quad stitch available through EX-i/EX print servers.
Hole Punching NA: 2
–
3 hole punch
Europe: 2 – 4 hole punch
Booklet Maker Capacity Up to 20 sets of a maximum of 15 stapled sheets and maximum size of 13 x 18 / SRA3.
Coated /uncoated stocks 106-176 gsm up to 7 sheets
Uncoated stock 177-220 gsm up to 5 sheets.
Saddle Stitching (SED) 8.5 x 11, 8.5 x 13, 8.5 x 14, 11 x 17, A4, A3
2 – 16 sheets / 8 – 60 page booklet
16 – 24 lb / 60 – 90 gsm Bond
Booklet Stitching (SED) 8.5 x 11, 8.5 x 13, 8.5 x 14, 9 x 11, 11 x 15, 11 x 17, 12 x 18, 13 x 18, A4, B4, A3, SRA3
Up to 15 sheets uncoated 24/b / 90 gsm
Up to 14 sheet uncoated 20 lb / 80 gsm plus 1 uncoated cover 90 – 176 gsm.
Bi-Fold Unstapled sets of up to 5 sheets on 64-220 gsm media.
BR Booklet
Maker Finisher
Limitations
 The HCS is subject to stack weight limitations, and settings have been implemented to prevent damage to the unit caused by an
excessively heavy stack. Please refer to this chart for approximate stack sizes for sheets larger than 8.5 x 11 in/A4.
 Stack quality may degrade and jams may increase with 64-106gsm coated paper stocks
 Mixed stock sizes can be sent to the HCS. However, the HCS generally should be unloaded between jobs that utilize different stock sizes
to prevent stack quality problems such as paper misalignment or stack integrity.
 Two or more stackers may be chained together.