Xerox Versant 80 Press - Table of Contents1 Product Overview; Introduction; Product Highlights; System; Product Configuration

Product Overview Xerox
®
Versant
®
80 Press
Customer Expectation and Installation Guide Xerox Confidential 1
1 Product Overview
Introduction
This document is intended to help you understand the performance and
capabilities of the Xerox
®
Versant
®
80 Press, including information on
optional accessories. Installation planning information is provided later in
this document and contains specifications and guidelines for installing your
press. Specifications and data in this document include Xerox and customer
proprietary information. The customer will use all reasonable efforts to
safeguard the document, will not disclose its contents to third parties, and
should only circulate it within the organization on a need-to-know basis.
Product Highlights
Productivity
 Improvements in imaging and fusing technology enable more sellable
prints to more customers
- New compact belt fuser drives up to 80 ppm speeds (single-
sided letter/A4).
- New Ultra HD Resolution that produces incredibly smooth
sweeps and spectacularly sharp images, graphics and text.
- New low gloss, low melt EA dry ink/toner that provides brilliant,
vibrant and powerful images.
 Simple Image Quality Adjustment (SIQA) tool utilizes the on-board
scanner to ensure that you spend more time printing and less time
adjusting the press.
o Create registration profiles by stock and tray, making the
registration front to back better aligned.
o Perform density adjustments to correct slight variations inboard to
outboard (“smile” correction).
o Adjust transfer settings to improve mottle on textured stocks
Cost Control
 Remote Services helps ensure market-leading press availability
 Longer-life components
 Scalable and modular solutions simplify workflows for one or many
presses
 Automated Color Quality Suite delivers consistent, accurate, and
automated color, which reduces waste, cost and time (optional with
Performance Package)
System / Product Configuration
Need pic of Base config.
Base Configuration
Feeding
Press with three main trays and control panel with
touch screen
Output
(Not shown) Choice of Finishing Options
Print Server
(Not shown) Choice of Print Server Options
Multi-sheet
Inserter (MSI)
 Tray is also referred to as Tray 5 / Bypass
 Mounts on top of optional 1-Tray OHCF or
Advanced HCF
 Maximum 250 sheet capacity
Scanner
Duplex Automatic Document Feeder
Options
Feeding Options
High Capacity
Feeder (letter)
 Single tray, holds up to 2,000 sheets
 8.5 x 11 in / A4 – Long Edge Feed (LEF)
1-Tray Oversized
High Capacity
Feeder
 Single tray holds up to 2,000 sheets and size up
to 13 x 19.2 in
Advanced High
Capacity Feeder
 Two tray , holds up to 2,000 sheets each (4,000
total) and sizes up to 13 x 19.2 in
Finishing Options
IMPORTANT: Refer to Configuration Dependencies for information on
configuration requirements for the finishing devices.
Offset Catch
T
r
a
y
(OCT)
Holds a maximum of 500 sheets
BR Finisher
The BR Finisher features include basic stapling
and hole punching.
BR Booklet Finisher
The Booklet Finisher adds saddle stitching
capability
Interface Module
The Interface Module acts as a paper path from
the press to the finishing device; it also allows
communication between the press and the
finishing device. The Interface Module also cools
and decurls paper as it exits the press and before
it enters the finishing device.
GBC
®
AdvancedPunch
®
The GBC AdvancedPunch is an inline die punch
that utilizes modular die sets to enable a variety
of hole- punch patterns in A4/8.5 x 11 in
(LTR/letter) Long- Edge-Feed (LEF) media. LTR die
punch ships with 19- hole die set; A4 die punch
ships with 21-hole die set.