Xerox Versant 80 Press - Page 26

Detailed Specifications Xerox
®
Versant® 80 Press
Customer Expectation and Installation Guide Xerox Confidential 21
Stacker Tray
IMPORTANT: These specifications are different from the Standard Finisher.
Standard Finisher Plus Stacker Tray Capacity by weight and paper finish
Paper type and weight Paper Size
B5 /
182 x 257 mm
A4 /
8.5 x 11 in
B4 / 8.5 x 14
in
A3 /
11 x 17 in
12 x 18 in* SRA3* 13 x 19.2 in*
Uncoated 52-80 gsm 1,500 2,000 1,500 1,500 1,500 1,500 1,500
80-300 gsm H=180 mm
(7.09 in)
H=378 mm
(14.88in)
H=180 mm
(7.09 in)
H=180 mm
(7.09 in)
H=180 mm
(7.09 in)
H=180 mm
(7.09 in)
H=180 mm
(7.09 in)
Coated 106-300 gsm H=180 mm
(7.09 in)
H=378 mm
(14.88 in)
H=180 mm
(7.09 in)
H=180 mm
(7.09 in)
H=180 mm
(7.09 in)
H=180 mm
(7.09 in)
H=180 mm
(7.09 in)
*Cannot be offset
301-350 gsm media cannot be sent to the Stacker Tray (Top Tray only)
Stapling
NOTE: These specifications are the same as the Standard Finisher.
Standard Finisher Plus Staple Tray Capacity by weight and paper finish
Paper type and weight Paper Size
B5 / 7.25 x 10.5 in A4 / 8.5 x 11 in B4 / 8.5 x 14 in A3 / 11 x 17 in
Uncoated 52-63 gsm 100 100 100 100
64-80 gsm 100 100 100 100
81-90 gsm up to 100 up to 100 up to 100 up to 100
91-105 gsm 50 50 50 50
106-128 gsm 30 30 30 30
129-150 gsm 19 19 19 19
151-176 gsm 12 12 12 12
177-220 gsm 5 5 5 5
221-256 gsm 4 4 4 4
256-300 gsm 3 3 3 3
301-350 gsm Not supported Not supported Not supported Not supported
Coated 55-105 gsm Not supported Not supported Not supported Not supported
106-128 gsm 5 5 5 5
129-150 gsm 5 5 5 5
151-176 gsm 5 5 5 5
177-220 gsm 5 5 5 5
221-256 gsm 4 4 4 4
256-300 gsm 3 3 3 3
301-350 gsm Not supported Not supported Not supported Not supported
Interposer
The Standard Finisher Plus includes a standard Interposer, used to insert pre-printed stock into finished sets without having to go through the print engine. Labels,
coated media and envelopes are not supported.
The Interposer is also called the Post-Process Inserter, and depending on the product, it is either Tray T1 or Tray 8.
NOTE: These specifications are the same as the Standard Finisher.
Interposer Capacity by weight and paper finish
Paper type and weight Paper Size
B5 / 8 x 10 in A4 / 8.5 x 11 in B4 / 8.5 x 14 in A3 / 11 x 17 in
Uncoated 52-80 gsm 200 shts 200 shts 200 shts 200 shts
81-220 gsm H=22mm (0.87 in) H=22mm (0.87 in) H=22mm (0.87 in) H=22mm (0.87 in)
Hole Punching
The Standard Finisher Plus offers Hole Punching as a standard feature.
 Holes are created on the trail edge of the sheet.
 Hole punching is not available to the Booklet Tray.
 Hole punch capacity is equal to the regular capacity of the chosen output tray
 For the USA, 2- and 3-hole punching is available; for Europe, 2- and 4- hole punch is available. Stacks can be punched on the left or right side, or on the top
edge
NOTE: These specifications are the same as the Standard Finisher.