Xerox Wide Format 6605 - Setting up a Static IP Address

If you are not already logged in as System Administrator, you are prompted for the
Administrator password when you select Network Setup. Contact your System
Administrator for the password if required.
NOTE
Whether you enter the network settings using the Web Printer Management
Tool or the User Interface, entering them in one place affects the other.
4. Select Machine Info from the Services menu.
5. Select the Administration tab.
6. Select Network Setup.
NOTE
The network settings can also be setup using the Web Printer Management Tool.
Refer to the Xerox FreeFlow Accxes System and Web Printer Management Tool
Setup Guide or Web Printer Management Tool Online Help for network settings
instructions.
Setting up a Static IP Address
1. Select the Services button on the Control Panel, followed by Machine Info
> Administration Tab > Network Setup.
2. Select IP Address from the Network Setup screen.
The IP Address window displays.
5-21
Xerox
®
Wide Format 6604/6605 Solution
™
User Guide
System Administrator