4. Select Off, X, Y, or XY.
5. Select Save.
Scan to Printer
The Scan to Printer feature generates a proof print of the scanned document, enabling
you to change the Basic Scan, Image Quality or Advanced Settings to achieve the
results you want. The factory default is Do Not Print Image.
1. Press the Services button on the Control Panel.
The Services menu will display with Scan to Mailbox as an option.
2. Select Scan to Mailbox.
3. Select the Advanced Settings tab
4. Select Scan to Printer.
5. Select the desired option.
• Disabled: The controller will not generate a print of the scanned image.
• Enabled: The controller will print the scanned image.
6. Select Save when finished.
Preview Generation
Use the Preview Generation option to enable or disable the generation of a preview
image for your scanned document. The thumbnail image is a.jpg file, which can be
downloaded into Accxes Client Tools.
The factory default setting is Create Preview Image.
1. Select Scan to Mailbox on the Services menu.
2. Select the Advanced Settings tab.
3. Select Preview Generation.
4. Select the desired option:
3-19
Xerox
®
Wide Format 6604/6605 Solution
™
User Guide
Scanning Documents
To Next Page
Loading...
