NOTE
Make sure the DHCP checkbox is not checked. Otherwise the IP Address, Gateway
and Netmask options cannot be selected.
3. Use the numeric touch pad to enter the IP Address in the format nn.nnn.nn.nnn.
4. Select Enter.
Setting up IP Gateway
1. Select the Services button on the Control Panel, followed by Machine Info
> Administration Tab > Network Setup.
2. Select Gateway from the Network Setup screen.
The IP Gateway screen displays.
3. Enter the Gateway in the format XXX.XXX.XXX.XXX.
4. Select Enter.
Xerox
®
Wide Format 6604/6605 Solution
™
5-22
User Guide
System Administrator
To Next Page
Loading...
