Xerox Wide Format 6605 - Copy Quality

2. Select Copy.
3. Select the Advanced Settings tab.
4. Select Scan Offset.
5. Select Enabled to define the amount of scan offset.
6. Set up the scan offset, using either the numbers keypad or the scroll buttons.
7. Select Save when finished.
TIP
When a Reduce/Enlarge ratio of other than 100% has been set up for the copy
job, the scan start position will be enlarged or reduced proportionately.
Copy Quality
This feature is only Enabled when Text/Photo is selected as the Original Type on the
Basic Copy screen.
• Normal: The default for 300 DPI.
• Best: The setting for 600 DPI.
1. Select Copy on the Services menu.
The Copy screen displays.
2. Select the Advanced Settings tab.
3. Select Copy Quality.
4. Choose Normal or Best depending on the desired resolution.
2-25
Xerox
®
Wide Format 6604/6605 Solution
™
User Guide
Printing and Copying Documents