Xerox Wide Format 6605 User Manual

RemedyCheckSymptoms
Select the media size series that matches
the media size.
Refer to Media Settings.
Did you select the correct
media size series?
Copy does not
print at the desired
size.
Load the document correctly.
Refer to Scanning the Document.
Is the document inserted
correctly in the Scanner?
Straighten and correctly insert the
document.
Refer to Scanning the Document.
Is the document folded or
bent?
Perform the normalization procedure to
correct auto width detection problems.
Is the problem the width of the
image size?
The minimum size document that can be
fed is approximately 114 mm/4.5 inches
wide by 200 mm/7.8 inches long.
Refer to Document Input.
Is the document too small?Document does
not feed into the
Scanner.
Correctly load the document.
Refer to Using the Manual Feed-in Shelf
(Bypass).
Is the document correctly
loaded in the Manual Feed-in
Shelf (Bypass)?
Unable to copy
using the Manual
Feed-in Shelf
(Bypass).
Insert a usable type of document.
Refer to Document Input and Scanning
the Document.
Is the document in good
condition?
Document often
jams.
The minimum size document that can be
fed is approximately 114 mm /4.5 inches
wide by 200 mm/7.8 inches long. Some
thick documents may require the removal
of the front return guides.
Refer to Document Input.
Is the document too small or
too thick?
Flatten out the curl and insert the
document again.
Is the document curled?A corner of the
document is
folded.
8-3
Xerox
®
Wide Format 6604/6605 Solution
™
User Guide
Problem Solving

Xerox Wide Format 6605 Specifications

General

Brand	Xerox
Model	Wide Format 6605
Category	Printer
Language	English