Xerox WorkCentre 3220 User Guide

Using SetIP
12
Using SetIP
1 From the Windows Start menu, select Programs or All Programs
Æ your printer driver name Æ SetIP Æ SetIP .
The program automatically detects and displays new and
configured print servers on your network.
2 Select the name of your printer and click . If you cannot find
your printer name, click to refresh the list.
N OTES :
• To confirm the MAC address, see the NETWORK PRINTER
CARD TEST PAGE. The NETWORK PRINTER CARD TEST
PAGE will be printed after the Configuration Page.
• The refreshed list doesn’t show your printer, click enter your
network printer card’s Mac address, IP address, subnet mask, default
gateway, and then click Apply .
3 Click OK to confirm the settings.
4 Click Exit to close the SetIP program.

Xerox WorkCentre 3220 Specifications

General

Print Technology	Laser
Print Resolution	Up to 600 x 600 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 4800 x 4800 dpi (enhanced)
Fax Transmission Speed	33.6 Kbps
Standard Paper Capacity	250 sheets
ADF Capacity	50 sheets
Monthly Duty Cycle	Up to 30, 000 pages
Functions	Print, Copy, Scan, Fax
Memory	64 MB
Duplex Printing	Manual
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Maximum Paper Size	8.5 x 14 in (Legal)