Using Your Printer in Linux
32
Configuring Printer Properties
Using the properties window provided by the Printers configuration, you
can change the various properties for your machine as a printer.
1
Open the Unified Driver Configurator.
If necessary, switch to Printers configuration.
2
Select your machine on the available printers list and click
Properties
.
3
The Printer Properties window opens.
The following five tabs display at the top of the window:
•
General
: allows you to change the printer location and name.
The name entered in this tab displays on the printer list in
Printers configuration.
•
Driver
: allows you to view or select another printer driver. By
clicking
Options
, you can set the default device options.
•
Jobs
: shows the list of print jobs. Click
Cancel job
to cancel the
selected job and select the
Show completed jobs
check box to
see previous jobs on the job list.
•
Classes
: shows the class that your printer is in. Click
Add to
Class
to add your printer to a specific class or click
Remove
from Class
to remove the printer from the selected class.
4
Click
OK
to apply the changes and close the Printer Properties
Window.
Printing a Document
Printing from Applications
There are a lot of Linux applications that you are allowed to print from
using Common UNIX Printing System (CUPS). You can print on your
machine from any such application.
1
From the application you are using, select
Print
from the
File
menu.
2
Select
Print
directly using
lpr
.
3
In the LPR GUI window, select the model name of your machine
from the Printer list and click
Properties
.
4
Change the printer and print job properties.
The following four tabs display at the top of the window.
•
General
- allows you to change the paper size, the paper type,
and the orientation of the documents, enables the duplex
feature, adds start and end banners, and changes the number of
pages per sheet.
Click.
To Next Page
Loading...
Need help?
General
