Basic Printing
14
Printing to a file (PRN)
You will sometimes need to save the print data as a file for your purpose.
To create a file:
1
Check the
Print to file
box at the
Print
window.
2
Select the folder and assign a name of the file and then click OK.
Printer Settings
You can use the printer properties window, which allows you to access
all of the printer options you need when using your printer. When the
printer properties are displayed, you can review and change the settings
needed for your print job.
Your printer properties window may differ, depending on your operating
system. This Software User’s Guide shows the Properties window for
Windows XP.
Your printer driver
Properties
window that appears in this User’s Guide
may differ depending on the printer in use.
If you access printer properties through the Printers folder, you can view
additional Windows-based tabs (refer to your Windows User’s Guide)
and the Printer tab (see “Printer Tab” on page 18).
N
OTES
:
• Most Windows applications will override settings you specify in the
printer driver. Change all print settings available in the software
application first, and change any remaining settings using the printer
driver.
• The settings you change remain in effect only while you are using the
current program.
To make your changes permanent
, make them in
the Printers folder.
• The following procedure is for Windows XP. For other Windows OS,
refer to the corresponding Windows User's Guide or online help.
1. Click the Windows
Start
button.
2. Select
Printers and Faxes
.
3. Select your printer driver icon.
4. Right-click on the printer driver icon and select
Printing Pref-
erences
.
5. Change the settings on each tab, click OK.
To Next Page
Loading...
Need help?
General
