Xerox WorkCentre 3220 User Guide

Using SetIP
11
2 Using SetIP
• Installing SetIP
• Using SetIP
N OTE : You can only use IPv4 setting for SetIP.
Installing SetIP
1 Make sure that the printer is connected to your computer and
powered on.
2 Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation window
appears.
If the installation window does not appear, click
Start and then
Run . Type X:\Setup.exe , replacing “ X ” with the letter which
represents your drive and click
OK .
If you use Windows Vista, click
Start → All programs →
Accessories → Run , and type X:\Setup.exe .
If the
AutoPlay window appears in Windows Vista, click Run
Setup.exe in Install or run program field, and click Continue in
the
User Account Control window.
3 Click Install SetIP Utility(Optional) .
4 Click Next .
5 Click Next .
6 Click Finish .

Xerox WorkCentre 3220 Specifications

General

Print Technology	Laser
Print Resolution	Up to 600 x 600 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 4800 x 4800 dpi (enhanced)
Fax Transmission Speed	33.6 Kbps
Standard Paper Capacity	250 sheets
ADF Capacity	50 sheets
Monthly Duty Cycle	Up to 30, 000 pages
Functions	Print, Copy, Scan, Fax
Memory	64 MB
Duplex Printing	Manual
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Maximum Paper Size	8.5 x 14 in (Legal)