EasyManuals Logo

Xerox WorkCentre 3335 User Manual

Xerox WorkCentre 3335
236 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
CCoonnnneeccttiinngg tthhee PPrriinntteerr ttoo tthhee NNeettwwoorrkk
Use a Category 5 or higher Ethernet cable to connect the printer to the network. An Ethernet network
is used for one or more computers and supports many printers and systems simultaneously. An
Ethernet connection provides direct access to printer settings using Xerox
®
CentreWare
®
Internet
Services.
To connect the printer:
1. Ensure that the printer is powered off.
2. Connect one end of a Category 5 or higher Ethernet cable to the Ethernet port on the printer.
Connect the other end of the Ethernet cable to a correctly configured network port on a hub or
router.
3. Connect the power cord to the printer, and plug the cord into an electrical outlet.
4. Turn on the printer.
For details on configuring network settings, refer to the System Administrator Guide at:
www.xerox.com/office/WC3335docs
www.xerox.com/office/WC3345docs
5. Enter the printer IP address or set Xerox
®
CentreWare
®
Internet Services to automatically
discover the network IP address of the printer.
CCoonnnneeccttiinngg ttoo aa CCoommppuutteerr UUssiinngg UUSSBB
To connect using USB, you need Windows 7, Windows 8 or later, Windows Server 2008 or later, or
Macintosh OS X version 10.9 or later.
To connect the printer to the computer using a USB cable:
1. Connect the B end of a standard A/B USB 2.0 cable to the USB Port on the front, right side of the
printer.
2. Connect the A end of the USB cable to the USB port on the computer.
3. If the Windows Found New Hardware Wizard appears, select Cancel.
4. Install the print drivers. For details, refer to Installing the Software.
CCoonnnneeccttiinngg ttoo aa TTeelleepphhoonnee LLiinnee
Note: Not all options listed are supported on all printers. Some options apply only to a specific
printer model, configuration, operating system, or driver type.
1. Connect a standard RJ11 cable, No. 26 American Wire Gauge (AWG) or larger, to the Line port on
the back of the printer.
2. Connect the other end of the RJ11 cable to an operating telephone line.
3. Enable and configure the Fax functions.
For details, refer to the System Administrator Guide at:
www.xerox.com/office/WC3335docs
www.xerox.com/office/WC3345docs
Xerox
®
WorkCentre
®
3335/3345 Multifunction Printer
User Guide
39
Installation and Setup

Table of Contents

Other manuals for Xerox WorkCentre 3335

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox WorkCentre 3335 and is the answer not in the manual?

Xerox WorkCentre 3335 Specifications

General IconGeneral
Print technologyLaser
Maximum resolution1200 x 1200 DPI
Time to first page (black, normal)6.5 s
Print speed (black, normal quality, A4/US Letter)33 ppm
Maximum copy resolution600 x 600 DPI
Time to first copy (black, normal)13 s
Scan toE-mail, FTP, File, USB
Scanner typeFlatbed & ADF scanner
Output color depth8 bit
Image formats supportedJPG, TIF
Maximum scan resolution4800 x 4800 DPI
Faxing-
Modem speed33.6 Kbit/s
Auto-redialingYes
Fax coding methodsJBIG, JPEG, MH, MMR (Fax coding method), MR
Fax resolution (black)300 x 300 DPI
Fax speed dialing (max numbers)200
Maximum duty cycle50000 pages per month
Page description languagesPCL 5e, PCL 6, PostScript 3
Printer managementIP Filtering, Secure IPP, SS, Secure HTTPS (SSL/TLS)
Internal memory1500 MB
Processor frequency1000 MHz
Total input capacity300 sheets
Total output capacity150 sheets
Maximum input capacity850 sheets
Auto document feeder (ADF) input capacity50 sheets
Storage temperature (T-T)0 - 40 °C
Operating temperature (T-T)10 - 32 °C
Operating relative humidity (H-H)20 - 80 %
DisplayLCD
Product colorBlue, White
Market positioningBusiness
CertificationCE Mark applicable to Low Voltage Directive (2006/95/EC), EMC Directive 2004/108/EC, FCC Part 15, Class B, FCC Part 68, GOST, GS Mark, R&TTE Directive 1999/5/EC, UL 60950-1/CSA 60950-1-07, 2nd Edition
Sustainability certificatesENERGY STAR
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (average operating)700 W
Standard interfacesEthernet, USB, Wireless LAN
Cabling technology10/100/1000Base-T(X)
Ethernet LAN data rates10, 100, 1000 Mbit/s
Mobile printing technologiesApple AirPrint, Google Cloud Print
Paper tray media typesCard stock, Plain paper, Recycled paper
Maximum ISO A-series paper sizeA4
Weight and Dimensions IconWeight and Dimensions
Depth420.6 mm
Width414.6 mm
Height449 mm
Weight15510 g

Related product manuals