• Do not use dry gum labels.
• Print only on one side of the sheet of labels. Use full sheet labels only.
• Store unused labels flat in their original packaging. Leave the sheets of labels inside the original
packaging until ready to use. Return any unused sheets of labels to the original packaging and
reseal it.
• Do not store labels in extremely dry or humid conditions or extremely hot or cold conditions.
Storing them in extreme conditions can cause print-quality problems or cause them to jam in the
printer.
• Rotate stock frequently. Long periods of storage in extreme conditions can cause labels to curl and
jam in the printer.
• In the print driver software, select Label as the paper type.
• Before loading labels, remove all other paper from the bypass tray.
LLooaaddiinngg LLaabbeellss iinn tthhee BByyppaassss TTrraayy
To load labels in the bypass tray:
1. Open the bypass tray.
Note: If the bypass tray is open and loaded with paper already, remove any paper that is a
different size or type.
Xerox
®
WorkCentre
®
3335/3345 Multifunction Printer
User Guide
79
Paper and Media