3. Load the labels face up.
4. Adjust the guides until they touch the edges of the paper.
5. If the control panel prompts you, in the Paper Settings screen, verify the paper size, type, and
color.
6. When finished, touch Confirm.
TTrraannssppaarreenncciieess
Note: You can print transparencies only from the bypass tray.
GGuuiiddeelliinneess ffoorr PPrriinnttiinngg TTrraannssppaarreenncciieess
• Remove all paper before loading transparencies in the bypass tray.
• Handle transparencies by the edges using both hands. Fingerprints or creases can cause poor print
quality.
• After loading transparencies, change the paper type to Transparency on the printer control panel.
Xerox
®
WorkCentre
®
3335/3345 Multifunction Printer
User Guide
83
Paper and Media
To Next Page
Loading...
