Xerox WorkCentre 5019 - Page 24

Xerox
®
WorkCentre
®
5019/5021
Network Addendum
24
• Edit/Delete selection checkbox
You can select the IP Filter to edit/delete.
• IP Filter Rule List
The IPv4 address that is allowed from access is displayed.
• Add button
The Add IP Filter Rule - IPv4 screen is displayed. Use to add an IPv4 address for exclusion from
access. You can add up to 10 IPv4 addresses.
– Source IP Address:
Set the IP address to be excluded from access.
– Source IP Mask:
Set the prefix length of the IP address to be excluded from access. (Default: 0)
– Edit button
The Edit IP Filter Rule - IPv4 screen is displayed. You can edit the IPv4 address to be excluded
from access.
• Source IP Address:
Edit an IP address that is excluded from access.
• Source IP Mask:
You can set the prefix length of an IP address that is excluded from access. (Default: 0)
• Delete button
Use to remove an IPv4 address from the access exclusion list.
IPv6 filtering
• IP Filtering
You can select Enabled to enable IP Filtering. (Default: Off)
• Delete/Edit selection checkbox
You can select the IP Filter to edit/delete.
• IP Filter Rule List
The IPv6 address that is excluded from access is displayed.
• Add button
The Add IP Filter Rule - IPv6 screen is displayed. Adds an IPv6 address for exclusion from access.
You can add up to 10 IPv6 addresses.
– Source IP Address:
You can set an IP address for exclusion from access.
– Source IP Mask:
You can set the prefix length of the IP address for exclusion from access. (Default: 0)
• Edit button
The Edit IP Filter Rule - IPv6 screen is displayed. You can edit the IPv6 address that is excluded
from access.
– Source IP Address:
You can edit the IP address that is excluded from access.