96
Create a New Print Queue on Windows XP:
1. Obtain the Print Driver for your operating system.
2. Verify that Print Services for Unix is loaded: from the [Start] menu, select [Control Panel].
3. Double-click [Add/Remove Programs].
4. Select [Add/Remove Windows Components].
5. Scroll down until you see [Other File and Print Services].
6. Click the [Details] button.
7. Check the box to add [Print Services for Unix] if not already installed.
Add the Printer
8. From the [Start] menu select [Printers and Faxes]. The Vista path is Start\Control Panel\Printer(s).
9. Select [Add a Printer], then [Next].
10. Select [Local Printer attached to this computer].
11. If already selected, Deselect [Automatically detect and install my Plug and Play printer].
12. Click [Next].
13. Select [Create a new port].
14. Select [LPR] from the Type of Port pull down menu, then click [Next].
15. Enter the IP Address of the printer.
16. Enter a name for the print queue and click [OK].
To Next Page
Loading...
