DocuMate 152 Scanner User’s Guide 111
Maintenance
7. On the Remove the Program window, select the Remove files
option, then click Remove.
The PaperPort software is removed.
8. On the Uninstall Completed window, click Finish.
9. Close all open windows and restart your computer.
To uninstall PaperPort from Windows 2000 or XP:
1. On the Windows taskbar, click Start, point to Settings, then
click Control Panel.
2. Click the Add or Remove Programs icon.
The Add or Remove Programs window opens.
3. Select ScanSoft PaperPort and click Remove.
4. A message window opens, asking if you are sure you want to
remove PaperPort from your computer. Click Yes.
The PaperPort software is removed.
5. Close all open windows and restart your computer.
To Install Another Driver
Before you can install another driver for your scanner, you must
remove the currently installed driver first. Then the new driver can
be installed.
1. Uninstall the One Touch 4.0 driver.
a. Open the Windows Control Panel.
b. Double-click on Add/Remove Programs.
c. Select One Touch 4.0 then click on the Remove button.
d. An “Add or Remove” message box opens and asks if you
are sure you want to remove One Touch 4.0 from your
computer. Click Yes.
The One Touch 4.0 software is removed from your computer.
2. Unplug the scanner USB cable.
3. Reboot (restart) your computer.
4. Follow the instructions in “Step 2: Install the Software” on
page 7 of this User Guide and follow steps for installing one of
the other driver options.
NOTE: The One Touch 4.0 driver is required for the scanner’s
buttons to function. If you select a driver without One Touch 4.0,
the scanner buttons will not initiate scanning.
To Next Page
Loading...
Need help?
General