DocuMate 152 Scanner User’s Guide 61
Scanning
3. Select the scan configuration Configure Before Scan.
4. Right-click on Configure Before Scan and choose an interface
to use for configuring before scanning.
Some interface options may not be available, based on the
drivers you installed for your scanner.
TWAIN—The TWAIN Interface opens for you to configure the
scanning. See “Scanning from the TWAIN Interface” on
page 84.
WIA—The Windows Image Acquisition Interface (WIA) opens
for you to configure the scanning. See “Scanning with the
Windows Image Acquisition” on page 98.
5. Click OK or Apply on the One Touch Properties window.
NOTE: The WIA option is only available if your computer is
running Microsoft Windows XP or Me.
Click the arrows to
select the button.
Select Configure
Before Scan.
Right-click on
Configure Before Scan
to get the menu, and
choose the interface to
use for scanning.
To Next Page
Loading...
Need help?
General