FusionServer 1288H V6 Server
Technical White Paper
NOTE
The port uses 3-wire serial
communication interface, and the
default baud rate is 115,200 bit/s.
Used to connect a display
terminal, such as a monitor or
KVM.
Used to connect to a USB 3.0
device.
NOTICE
⚫
The maximum current is 1.3 A for
an external USB device.
⚫
Before connecting an external
USB device, ensure that the USB
device functions properly.
Otherwise, it may adversely
impact the server.
⚫
The USB 3.0 port can be used to
supply power to low-power
peripherals. However, the USB
3.0 port must comply with the
USB specifications. To run
advanced peripherals, such as
external CD/DVD drives, an
external power supply is required.
Used to connect to a power
distribution unit (PDU) through a
power cable. You can select the
PSUs as required.
NOTE
When determining the PSUs, ensure
that the rated power of the PSUs is
greater than that of the server.
5.3 Processors
⚫
The server supports one or two processors.
⚫
If only one processor is required, install it in socket CPU1.
⚫
Processors of the same model must be used in a server.
⚫
Contact your local sales representative or see "Search Parts" in the Compatibility
Checker to determine the components to be used.
To Next Page
Loading...
Need help?
General
