xFusion Digital Technologies FusionServer 1288H V6

FusionServer 1288H V6 Server
Technical White Paper
5 Hardware Description
2022-06-25
51
5.5.3 Drive Indicators
SAS/SATA Drive Indicators
Figure 5-33 SAS/SATA drive indicators
Table 5-21 SAS/SATA drive indicators
Activity Indicator
(Green)
Fault Indicator
(Yellow)
Description
Off
Off
The drive is not in position.
Steady on
Off
The drive is detected.
Blinking at 4 Hz
Off
Data is being read or written properly, or
data on the primary drive is being rebuilt.
Steady on
Blinking at 1 Hz
The drive is being located.
Blinking at 1 Hz
Blinking at 1 Hz
Data on the secondary drive is being rebuilt.
Off
Steady on
A drive in a RAID array is removed.
Steady on
Steady on
The drive is faulty.
NVMe Drive Indicators
Figure 5-34 NVMe drive indicators
⚫
If the VMD function is enabled and the latest VMD driver is installed, the NVMe drives
support surprise hot swap.