13. Infrared sensor
Insert a SIM card
1. Withdraw the SIM card slot with the ejection tool.
2. Put the SIM card on the slot.
3. Insert the slot back into the phone.
Note
If you insert two SIM cards, you can set one as the primary mobile data SIM and the
other as the primary calling SIM, or set call forwarding between the two SIM cards. See
Set a default call SIM and Set a default data SIM for more information.
Connect to Wi-Fi
1. Go to Settings > Wi-Fi .
2. Tap to enable Wi-Fi.
3. Select an available network to connect.
Note
You need to enter a password for an encrypted Wi-Fi network.
Tip
You can swipe down the status bar at the upper-right corner of the phone, then tap
Wi-Fi on the Control center to connect the same Wi-Fi next time.
Power on the phone
1. Press and hold the Power button until the phone vibrates.
2. Finish the setup wizard.
02
To Next Page
Loading...
