12
Machine Interface – Front panel
1 Volume knob
• Turn the knob to increase or decrease the volume.
• A momentary press alternates between headphone/speaker output.
2 Power supply /transceiver indicator light
• Standby /receive state: yellow-green;
• Red indicates the radio is transmitting.
3 Power (on/off) switch
• When powered-off, a momentary press of this button will turn the radio
on.
• When powered-on, a long press of this button will shut down the radio.
• While starting up, a momentary press of the button will turn off the screen
to save electricity.
4 Multi-function Adjustment Knob
• By default, turning this knob will change the frequency in 100kHz steps.
• A long press of this knob will select custom action functions.
5-6 MODE switching
Pressing these buttons will cycle through all the modes.
7-8 BAND switching
Pressing these buttons will switch up or down through the Amateur bands
or the Amateur and SW Broadcast bands Whether the SW Broadcast
bands are included in the sequence is defined through Function 8 in the
System menu. (Transmission is only allowed in the HAM bands).
To Next Page
Loading...
