4
Warnings
1. Please read this manual fully before operation so as to get a good
understanding of the G90’s capabilities and functions.
2. When using an external mains power supply or battery, carefully check
the polarity of the power cord and do not reverse the polarity.
3. The warranty of this radio does not cover damage caused by an incorrect
external power connection error or damage caused by improper power
supply voltage.
4. Only qualified technicians shall service this equipment.
5. Do not tamper with the transceiver for any reason.
6. Do not operate the transceiver with a damaged antenna. If part of an
antenna comes into contact with your skin, a minor burn can result.
7. Turn off your transceiver prior to entering any area with explosive or
flammable materials.
8. Do not operate your transceiver in any area near explosive or flammable
materials.
9. To avoid electromagnetic interference, please turn off your transceiver in
any area where notices instruct you to do so.
10. Turn off your transceiver before boarding an aircraft; any use of a radio
must be in accordance with airline regulations and crew instructions.
11. Turn off your transceiver before entering any blasting area.
12. Do not place the transceiver over any airbag deployment area in vehicles
containing airbags.
13. Do not expose the transceiver to direct sunlight over a long period of
time, nor place it close to any heat source.
14. When transmitting with the transceiver, hold the microphone 3 to 4
centimeters away from your lips and keep a safe distance away from the
antenna in accordance with the ICNIRP and any additional local
regulations.
Copyright
All rights reserved 2022 Chongqing Xiegu Technology Co., Ltd. Reproduction
of any part of this manual is prohibited without permission.
We would like to extend sincere gratitude to Radioddity's ham friends -- Bob
Nagy (AB5N), Garry F. Decker (W9WHF) and Ed Durrant (DD5LP), for their
instructive advice and useful suggestions in this G90 English manual.
To Next Page
Loading...
