XIEGU G90S - Operation; Transceiver Start and Shutdown; To Turn off the LCD Screen to Save Power; Display of Power Voltage

21
Operation
In order to familiarize yourself with the functions and capabilities of the G90/S
portable transceiver, please read the operation guide fully to understand the
powerful functions of the G90/S.
Transceiver start and shutdown
1. To start the transceiver: press the button for a short period of time.
2. To Shut down the transceiver: press and hold the button for 1s.
To turn off the LCD screen to save power:
While turned on, press the button quickly to turn off the LED display.
■ With the screen turned off, the radio still works normally. Pressing any
button or turning a knob will turn on the screen again.
Display of Power Voltage:
After turning on the radio, the upper right corner of the screen will display the
DC voltage of the connected power supply.
The supply
voltage is 13.8V.
♦ Operation above the maximum voltage given in the specifications will
seriously damage the radio!
♦ The displayed voltage may vary ±0.3V from the actual value.
The G90/S is uniquely designed such that lower in-range voltages do not result
in significantly reduced TX power or RX performance.
ON/OFF button