XIEGU G90S - Machine Interface - Rear Panel

13
9 FUNC indicator
This LED will light when the second function of a button is activated.
10 Δ F indicator This LED blinks when the CW signal is tuned in when in CW
mode allowing the CW decoder to work.
11 Main VFO/Mem tuning knob
Change the current frequency by rotating this knob. When setting menu
items this knob changes the parameter’s value.
12 Function keys
The definition and functions of these buttons are detailed in the operation
section of this manual (Pages 17-18).
Machine Interface - Rear Panel
13 Antenna interface
SO-239 type - impedance 50Ω.
14 KEY interface
A 3.5mm stereo jack used to connect manual/paddle CW keys. (See
Page 10 for the wiring details)