XIEGU G90S - Operation of a Buttons Second Function; Screen Display Icons

19
Operation of a button’s second function:
Press the [FUNC] button - the F indicator LED will illuminate, then press the
required function’s button.
Press the [FUNC] button again to exit the secondary function. At this time, the
F indicator LED will go off.
Pressing the [FUNC] button for 1-2 seconds will take you into the System Menu
(see later in this manual for details of parameters that can be set).
■ In any function (including the secondary FUNC setting) a short press of the
main knob will save the setting. This will also exit the function setting mode and
return you to the main interface.
Screen Display Icons
Multi-function indicator
Receiving state is meter s
Transmission state is power
meter
Mode display
Standing-wave display area
Spectrogram display area
Receiving level display
Receive bandwidth indication
Volume indication
Power supply voltage indication
VFO display area
Waterfall diagram display area
Status display area