Xilinx SP605 - Features

10 www.xilinx.com SP605 Hardware User Guide
UG526 (v1.9) February 14, 2019
Chapter 1: SP605 Evaluation Board
Features
The SP605 board provides the following features (see Figure 1-2 and Table 1-1):
• 1. Spartan-6 XC6SLX45T-3FGG484 FPGA
• 2. 128 MB DDR3 Component Memory
• 3. SPI x4 Flash
• 4. Linear BPI Flash
• 5. System ACE CF and CompactFlash Connector
• 6. USB JTAG
• 7. Clock Generation
• Fixed 200 MHz oscillator (differential)
• Socket with a 2.5V 27MHz oscillator (single-ended)
• SMA connectors (differential)
• SMA connectors for MGT clocking (differential)
• 8. Multi-Gigabit Transceivers (GTP MGTs)
• FMC LPC connector
•SMA
•PCIe
• SFP module connector
• 9. PCI Express Endpoint Connectivity
•Gen1 x1
• 10. SFP Module Connector
• 11. 10/100/1000 Tri-Speed Ethernet PHY
• 12. USB-to-UART Bridge
• 13. DVI CODEC
• 14. IIC Bus
• IIC EEPROM - 1KB
•DVI CODEC
• DVI connector
• FMC LPC connector
• SFP Module connector
• 15. Status LEDs
•Ethernet Status
•FPGA INIT
•FPGA DONE
• 16. User I/O
•USER LED GPIO
• User pushbuttons
•CPU Reset pushbutton
•User DIP switch - GPIO
• User SMA GPIO connectors