Xilinx SP605 - Onboard Power Regulation

SP605 Hardware User Guide www.xilinx.com 57
UG526 (v1.9) February 14, 2019
Detailed Description
Onboard Power Regulation
The following figure shows the SP605 onboard power supply architecture. The SP605 uses
Texas Instruments power controllers for primary core power control and monitoring.
X-Ref Target - Figure 1-2 5
Figure 1-25: Onboard Power Regulators
Jack
J18 or J27
Power Supply
12V
Linear Regulator U5
5.0V@1.5A max
TL1963AKTTR
3.3V@10A max
PTD08A010W
1.5V@10A max
PTD08A010W
Linear Regulator U51
MGT AVCC 1.2V@3A max
TPS74401
Sink/Source Regulator U11
0.75 VTT/VREF@3A max
TPS51200DRCT
Power Controller 1 U26
UCD9240PFC
PWR
Switching Module U18
Switching Module U20
Switching Module U19
Switching Module U22
Switching Mod
ule
U21
Linear Regulator U49
3.0V@500mA max
LT1763CS8
VCCINT 1.2V@10A max
PTD08A010W
VCCAUX 2.5V@10A max
PTD08A010W
VCC 2.5V@10A max
PTD08A010W
Power Controller 2 U27
UCD9240PFC
Linear Regulator U44
1.8V@500mA max
TL1963A-18DCQR
1.5V
MGTs
DDR3 Memory Terminations
System Power
Linear FLash Memory
FPGA
FPGA
FPGA
SPI x4 Memory
Op Amps
DDR3 Memory
3.3V
10K
10K
0.75Vref
UG526_25_100509