Xilinx ZCU111 User Manual

ZCU111 Board User Guide 6
UG1271 (v1.1) August 6, 2018 www.xilinx.com
Chapter 1
Introduction
Overview
The ZCU111 evaluation board features the Zynq® UltraScale+™ RFSoC ZCU28DR device.
This board enables the evaluation of the integrated RF-DAC and RF-ADC functionality, soft
decision forward error correction (SDFEC), and FPGA fabric and RFSoC features, such as the
quad core Arm® Cortex™-A53 processing system (PS) and the dual-core Arm Cortex-R5
real-time processors. The ZCU111 evaluation board is equipped with many of the common
board-level features needed for design development, such as DDR4 memory, networking
interfaces, FMC+ expansion port, and access to the new RF-FMC interface.
The ZCU111 evaluation board kit includes an out-of-the-box FMC XM500 balun transformer
add-on card to support signal analysis and loopback evaluation. This card includes
on-board high-frequency and low frequency baluns and SMAs for custom baluns and
filtering. For more information on this card, see Appendix D, HW-FMC-XM500.
Additional Resources
See Appendix E, Additional Resources and Legal Notices for references to documents, files,
and resources relevant to the ZCU111 evaluation board.
Send Feedback

Xilinx ZCU111 Specifications

General

Brand	Xilinx
Model	ZCU111
Category	Motherboard
Language	English