ZCU111 Board User Guide 64
UG1271 (v1.1) August 6, 2018 www.xilinx.com
Chapter 3: Board Component Descriptions
User PMOD GPIO Connectors
[Figure 2-1, callout 20, 21]
The ZCU111 evaluation board supports two right-angle PMOD GPIO receptacles J48 and
J49. The 3.3V PMOD nets are level-shifted and are wired to the XCZU28DR device U1 banks
28, 66, and 68. Figure 3-24 shows the GPIO PMOD connector circuits.
X-Ref Target - Figure 3-24
Figure 3-24: PMOD Connectors