ISO cable connections
ISO cable
1. Terminal plug
This plug connects the ISO cable
with the unit.
2. ISO plug
This plug connects the ISO cable
with the vehicle. The ISO cable as
such serves as an extension cable
for an eased connection of the unit
to the vehicle provided that the
vehicle has a standardized ISO plug
with the appropriate pin assignment.
Please note
» The multicore cable may vary depen-
ding on the current model. Though the
conguration of the loud speakers- and
power supply- cables (steady plus,
ignition plus, ground) is consistent.
» Certain patches could be possibly
found not only on the ISO interface
(socket/plug), but immediately on the
device, e.g. ports for the handbrake,
rearview camera, steering wheel
remote control etc.
» The ISO port may be already inte-
grated in certain units. In this case
an additional ISO cable becomes
unnecessary.
To Next Page
Loading...
Need help?
General
