Wallpaper
In setting menu/main menu, touch
wallpaper icon can enter wallpaper
setting interface.
You can choose the wallpaper you like:
up and down sliding can scan wallpa-
pers, conrm and touch icon can
nish setting.
Also can insert SD card in the MAP slot,
and choose SD's picture as wallpaper.
SWC setting
In setting menu, touch SWC
icon enter SWC setting interface.
If need reset function, click icon,
then the functions set before will be
deleted.Then repeat the above steps can
reset corresponding functions.
1. Click the function button that need
to be set
2. When the set function button is
lighted, long press the correspon-
ding button on car SWC, K2 icon will
be lighted after set successfully
3. Touch icon can save setting
Repeat steps for the other buttons on
your steering wheel.
Factory Settings
Touch Factory Settings icon
can show number keyboard, input“0000”
, then click icon, can go to
factory setting menu. Then can set radio
region/ starting logo/ function icon/etc.
To Next Page
Loading...
Need help?
General
