Xomax XM-2DTSBN6220BT User Manual

27
XM-2DTSBN6220BT
XOMAX
DE
Thema:
Set the GPS-Path
Calibration
If the touchscreen appears to operate
not properly perhaps you have to re-ca-
librate it. Choose the calibration mode
and then tip the arrow key.
Procedure:
As soon as the calibration starts on the
screen appear 5 crosses. You have to
tip the very middle of each following the
numeration: 1, 2, 3, 4, 5.
In ideal case use the specially designed
stylus.
As soon as you tipped each of the
crosses the touchscreen is calibrated.
Please note: you have to TIP only the
CROSSES, do not fondle through the
touchscreen.
Language setting
Touch Language icon can
enter Language setting interface, set the
language needed.
Brightness
Left and right sliding icon can adjust
screen's brightness.
Set the GPS-Path
You have to set he correct path to the
executive le of the navigation software
on the SD memory card so the unit's
processor could nd it and start the
programm properly.
Please tip the NAVI key on the front
control panel. Now tip the correspon-
ding folder in the le manager and then
conrm your selection tipping the
key on the screen. Perhaps you
will have to scroll the le list to nd the
executive le. Once you found it tip it as
well and then conrm the selection with

Xomax XM-2DTSBN6220BT Specifications

General

Brand	Xomax
Model	XM-2DTSBN6220BT
Category	Car Video System
Language	English