5-8
ARRIVING ON SITE
Operating the Levelsystem
AUTOMATIC Levelling
Before starting the automatic levelling procedure: make sure that the handbrake is engaged.
Also ensure that everyone has exited the caravan - including yourself.
IMPORTANT: Before levelling the vehicle (in case of considerable slope) it is advisable to put
some extra materials (e.g. wooden plates) under the footplate of the jacks on the lower side, this
with the aim to compensate on extreme height difference.This will avoid the risk that the system
is not able to level the vehicle due to large difference in height. When the difference in height is
too large the hydraulic supports can come to the end of their stroke without achieving a level
position.
Step 1 Push the button “AUTOMATIC” to activate the Levelsystem in automatic levelling.
Step 2 Push the button “AUTO” to activate Levelsystem further in automatic mode. Now the
hydraulic pump starts working and the hydraulic levelling procedure starts automatically
by extending the jacks.
To Next Page
Loading...