5-10
ARRIVING ON SITE
MANUAL levelling
Before starting the manual levelling procedure: make sure that the handbrake is engaged. Also
ensure that everyone has exited the vehicle, including yourself.
The manual levelling function is mainly used when automatic levelling is not possible due to a
large tilt of the vehicle. With the help of this feature it is also possible to change the position of the
vehicle; think of your sleeping comfort. Most people prefer to sleep with their head up slightly.
Depending on the orientation of the vehicle with this feature you can manually adjust the angle
where necessary.
IMPORTANT: Before levelling the vehicle manually (in case of considerable slope) it is advisable
to put some extra materials (e.g. wooden plates) under the footplate of the jacks on the lower
side, this with the aim to compensate on extreme height difference. This will avoid the risk that
the system is not able to level the vehicle due to large difference in height. When the difference in
height is too large the hydraulic supports can come to the end of their stroke without achieving a
level position.
Step 1 Push the button “MANUAL” to activate the Levelsystem in manual levelling.
After pushing the button “MANUAL” to activate the Levelsystem working in manual mode
the screen shown below will be visible. Depending on the position of the vehicle, one or
more yellow arrows light up.
To Next Page
Loading...