6.2 Customer Support
Xsens is glad to help you with any questions you may have about the Xsens DOT, or about
the use of the technology for your application. The fastest way is Xsens’ Help Centre, where
engineers and other Xsens users meet. Please visit this Help Centre:
⇒ Help centre: https://base.xsens.com
⇒ Support page: https://www.xsens.com/support
6.3 Product Compliance
European Union regulatory compliance
Based on the tested mode of operation(s), the applicable performance criteria, and
specified acceptance criteria, this device complies with the essential requirements and
other relevant provisions of:
Radio Equipment Directive (RED) 2014/53/EU
Electromagnetic compatibility (EMC) 2014/30/EU
Low Voltage (Product Safety) 2014/35/EU
Restriction of the use of certain hazardous substances (RoHS) 2011/65/EU
FCC compliance
Based on the tested mode of operation(s), the applicable performance criteria, and
specified acceptance criteria, this device complies with Part 15 of the FCC Rules.
Object classification Directive
Computers and other digital devices, unintentional radiator 47 CFR 15
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may
cause undesired operation.
Japan radio equipment compliance
The ANNA-B112 module complies with the Japanese Technical Regulation Conformity
Certification of Specified Radio Equipment (ordinance of MPT N°. 37, 1981), Article 2,
Paragraph 1:
- Item 19 "2.4 GHz band wideband low power data communication system".
Find more detailed information on Xsens DOT certification here
.
To Previous Page
Loading...
