EasyManua.ls Logo

Xsensor ForeSite SS - ForeSite SS System Warnings and Cautions

Xsensor ForeSite SS
70 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Introducon
11
Warnings&Cauons
!
The ForeSite SS System has been designed and tested in accordance with
the previously menoned safety standards. To ensure safe use of the
product, follow all safety and operang instrucons in this guide. At the
end of the System product life, please contact XSENSOR for safe disposal
instrucons (see Appendix 4).
1. Warning: Use only approved power supplies (SINPRO part number
HPU32A-105 and Glob Tek part number WR9QA1200MICB-N-M)
with the ForeSite SS System. Power supplies specied are part of
the equipment. Do not posion any part of the equipment to keep it
from disconnecng from the mains, should the need arise.
2. Warnings: ForeSite SS should only be congured as indicated in the
hardware secon of the User Guide. Modicaon of this equipment
is prohibited.
3. Warning: The ForeSite SS Sensor should be cleaned between each
use. Unplug all product components from the wall outlet before
cleaning. See the Maintenance secon of the User Guide for
informaon on cleaning.
4. Warning: The ForeSite SS System is not intended for long term use.
5. Warning: The ForeSite SS System is intended for use by health care
professionals only.
6. Warning: To reduce risk of electric shock, connect the Magtech
26-2704 to supply mains with protecve earth. Where available,
connect the equipment to a receptacle marked “Hospital Only,
“Hospital Grade,” or an equivalent.
7. Warning: Always completely disconnect the power cord from
your chassis whenever you work with the hardware. Do not make
connecons while the power is on. Sensive electronic components
can be damaged by sudden power surges.
8. Warning: Do not connect any external accessories, including
computers, cables, or peripherals, to the ForeSite SS Display Tablet
input/output ports (USB, Ethernet, and HDMI) which is part of a
wired (USB Sensor Pack) system during client pressure monitoring.
If using the ForeSite SS Tablet Wireless System (Wireless Sensor
Pack), please note that the ForeSite SS tablet is no longer medically
compliant when connected to any external accessory. As such,
please ensure the tablet and any accessory equipment are kept at
least 1.83m (6’) away from the subject when connected.

Table of Contents