Xsensor ForeSite SS - Software Error Messages

Appendixes
57
SowareErrorMessages
SOFTWARE ERROR MESSAGES RECOMMENDED ACTION
The sensor last used cannot be
found. Be sure it is on and charged.
Refer to page 18 for informaon on
charging and powering ON your X4.
The baery for the sensor needs
charging.
Refer to page 18 for informaon on
charging your X4.
A selected sensor cannot be found.
Be sure it is on and charged.
Refer to page 18 for informaon on
charging and powering ON your X4.
Lost connecon to one or more of
the sensors.
Navigate to the Sensors tab
in Sengs to re-establish the
sensor(s) connecon.
The video capture session was
interrupted at due to a sensor
communicaon error.
Navigate to the Sensors tab
in Sengs to re-establish the
sensor(s) connecon.
Lost connecon with the sensor.
Please connect a sensor to resume
image capture.
Navigate to the Sensors tab
in Sengs to re-establish the
sensor(s) connecon.
The detected hardware congur-
aon is not medically compliant
while viewing a live pressure image
and may pose risks to client safety.
Disconnect your sensor pad or
proceed at your own risk.
Refer to Appendix 2 for medically
compliant conuraons for
ForeSite SS.