Xsensor ForeSite SS - ForeSite SS Sensor Management

ForeSite SS Soware
47
Sensors
Your ForeSite SS sensors are designed to connect automacally to ForeSite SS
so that you can begin pressure imaging quickly and easily. In some instances,
however, you may experience connecvity issues, or wish to use two sensors
for pressure imaging. The following features address these scenarios.
ToRe-ConnectaSensorthathasLostConneconwithForeSiteSS
→ If the sensor connecvity icon at the top of your screen indicates you have
lost your connecon , manually scan for your sensor and reconnect.
1. Ensure your sensor is congured and connected per the instrucons in the
Hardware secon of this user guide.
2. Select Refresh to scan for a sensor connecon
3. If ForeSite nds your sensor, it will appear in the list and display a live
thumbnail of the pressure image. Select the checkbox of the sensor(s) you
wish to connect.
4. Aer closing out of Sengs, the sensor connecvity icon should now show
as connected.
ToConnecttoTwoSensors(e.g.backandseat)
1. Ensure your sensors are congured and connected per the instrucons in
the Hardware secon of this user guide.
2. If ForeSite nds your sensors, they will appear in the list and display a live
thumbnail of the pressure image. Select the checkbox of the sensor(s) you
wish to connect.
→ To disconnect a sensor, simply deselect the checkbox next to the sensor in
the list and exit from Sengs.
SystemInformaon
ToCheckforSowareUpdates
1. Select Check For Updates