Xsensor ForeSite SS - System Set-Up

To Next Page

To Previous Page

Appendixes

System Set-Up

Warning: To ensure operator and paent safety, and compliance with

regulaons as detailed on connect and operate ForeSite SS only as described

here.

1) Refer to the instrucons for charging, connecng and powering ON your

X4 in the Hardware secon of this user guide.

2) Insert XSENSOR USB ash drive into PC USB port to install ForeSite SS

Note: for computers that are not Bluetooth enabled, please insert the

ForeSite Bluetooth Adaptor into your computer’s USB port to establish a

Bluetooth connecon.

• Follow onscreen instrucon to view pre-loaded les on USB. If not

automacally prompted, navigate to USB drive on PC.

• Open folder called ForeSite SS Desktop Soware and run installaon

le called InstallForeSiteSSDesktop.

• Follow the onscreen installaon instrucons to install ForeSite SS on

your desktop.

• Launch ForeSite SS from the applicaon icon now displayed on your

desktop.

3) Inspect the sensor pad covering material and cable for signs of damage.

These include, but are not limited to, tears, punctures, cracked enclosures,

and/or exposed wiring. If damage is idened or suspected, contact

XSENSOR for repair (see Appendix #4).

Warning: Do not aempt live pressure imaging if the sensor pad is

damaged or soiled. Refer to the Maintenance secon of this user guide for

more informaon on cleaning.