Xsensor ForeSite SS - Storage Steps; Environmental Conditions for System Storage and Transportation

ForeSite SS Hardware
31
Storage Steps
1. Place the sensor pad on a at surface.
2. Place the carry case insert along the edge of the sensor pad and secure
the sensor cable using the aached elasc straps.
3. Roll, wrapping the sensor pad around the carry case insert.
4. Store the wrapped sensor pad in the designated sensor carry case
compartment and secure it with the aached straps.
Environmentalcondionsforsystemstorageandtransportaon:
Ambient Temperature -4 to 140˚F (-20 to 60˚C)
Relave Humidity 10 to 90%, non-condensing
Atmospheric Pressure 0.50 to 1.06 bar
Do not place heavy objects on top of a folded sensor. Store the system
components in the provided protecve case(s) when not in use, and avoid
leaving pieces of the system lying unprotected or in a place where there
may be a tripping hazard or danger of the system components being
damaged. If the system is required to be transported to another locaon,
ensure all components are folded and/or safetly put away into their
protecve cases during transport.