Xsensor ForeSite SS - Cleanable Sensor Instructions

ForeSite SS Hardware
33
For an UNSOILED Sensor:
→ NOTE: the sensor should never be immersed in water
6
H2O
H
2
O
4
1:10
1:10
3
cl
1 : 10
H2O
H
2
O
21
5
H
2
O
For sensors WITHOUT this, protecve sleeves are provided by XSENSOR
to shield against soiling. The sensor should not be exposed to moisture
and should never be immersed in water. In the case that something is
accidentally spilled on the sensor:
• Wipe carefully with a damp cloth and isopropyl alcohol if absolutely
necessary
• NEVER use a steam cleaner on the sensor
• Aer cleaning the sensor, allow to air dry COMPLETELY before
returning to use.
Cauon: Under no circumstances should a phenolic-based cleaning
soluon be used.
CleanableSensorInstrucons
1. Lay the unsoiled sensor on at surface
2. Prepare a 1:10 cleaning soluon (1
bleach : 10 water).
3. Dip a so cloth into 1:10 cleaning
soluon.
4. Clean sensor with so cloth moistened
with cleaning soluon.
5. Wet clean so cloth with tap water.
6. Clean residual soluon o with wet
cloth.