Xsensor ForeSite SS - Emission and Immunity Standards

Introducon
5
Product Compliance:
Emission & Immunity Standards
The ForeSite SS is a class A digital device suitable for business, industrial and
commercial environments. It is not intended for residenal use. The ForeSite
SS may cause radio interference or may disrupt the operaon of nearby
equipment. Portable and mobile RF communicaons equipment can also
aect ForeSite SS. It may be necessary to take migaon measures, such as
reorienng or relocang the equipment or shielding the locaon.
The ForeSite SS should not be used adjacent to or stacked with other
equipment. If adjacent or stacked operaon is necessary, the Pressure
Imaging System should be observed to verify normal operaon in the
conguraon in which it will be used.
Use of accessories and cables other than those provided by XSENSOR may
result in increased emissions or decreased immunity.
ForeSite SS complies with Part 15 of the FCC Rules. Operaon is subject to the
following condions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operaon.
Standards Compliance:
√ EN 60601-1-2:2007 (Ed3.0) Medical Electrical Equipment – Part 1:
General Requirements for Safety 2. Collateral Standard: Electromagnec
Compability (Non-life-supporng, Group 1, Class A Equipment)
√ FCC 15.107/CISPR 11 (Class A) Conducted Emissions
√ FCC 15.109/CISPR 11 (Class A) Radiated Emissions
√ Industry Canada ICES-003(A)/NMB-3(A) Compliant
√ IEC 61000-3-2:2005 Harmonics Emissions
√ IEC 61000-3-3:2008 Flicker Emissions
√ IEC 61000-4-2:2008 Electrostac Discharge
√ IEC 61000-4-3:2008 Radiated Suscepbility
√ IEC 61000-4-4:2007 Electrical Fast Transients
√ IEC 61000-4-5:2005 Surge Suscepbility
√ IEC 61000-4-6:2006 Conducted Suscepbility
√ IEC 61000-4-8:2001 Magnec Suscepbility
√ IEC 61000-4-11:2007 Dips & Interrupts