Need help?Do you have a question about the Xtreme Power Conversion P91 and is the answer not in the manual?
General| Brand | Xtreme Power Conversion |
|---|---|
| Model | P91 |
| Category | UPS |
| Language | English |
Provides an overview of the manual and its intended use for maintenance and repair services.
Crucial safety guidelines for qualified personnel to prevent injury and equipment damage.
Explains the function and circuit of the Switch Power Supply (SPS) that powers UPS operation.
Details the Power Factor Correction (PFC) and Booster function and its circuit diagram.
Describes the three-level inverter topology used for AC output generation.
Explains the charger's role in maintaining battery health and charge status.
Details the EMI board's function in filtering noise and protecting the UPS system.
Explains the SPS-Charger board, its power generation, and configuration options.
Describes the CNTL board as the core controller managing UPS operations and communication.
Details the communication board's interfaces (RS232/USB) and EPO port.
Explains the EMI board's function in preventing noise and surge protection.
Describes the Main Power board's role in AC/DC and DC/AC power conversion.
Explains the Para board's function for parallel UPS communication.
Details the O/P Relay board's use in parallel systems for output disconnection.
Explains the meaning of LED indicators for various UPS operational modes.
Shows the layout of the LCD display and its various information indicators.
Defines the icons displayed on the LCD and their corresponding functions.
Defines warning icons and fault codes on the LCD for diagnosing UPS issues.
Lists essential instruments and tools required for UPS repair and debugging.
Details jumper settings on the Control Board for different UPS models.
Explains setting charger current via LCD interface or command.
Details setting charging voltage based on battery count via jumpers.
Describes parameter setting methods for system regulation using RS232 commands.
Provides initial component checks and debugging steps for quick problem identification.
Presents waveform charts to verify UPS operational status and test results.
Introduces fundamental communication commands for debugging and regulating the UPS.
To Next Page
