3 Product Description
3.1 General description
Description
The e-XC pump is a single stage, double-suction centrifugal pump with the following
features:
• A high efficiency and rugged construction
• Horizontal grouted frame mounting
• Compact design
• Foot-mounted volute
• Regreasable bearings
• Horizontal split case
• Center drop out coupler
Intended applications
WARNING:
This product can expose you to chemicals including Lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more
information go to: www.P65Warnings.ca.gov.
Certain components of the e-XC product line may contain trace amounts of lead. As such,
the product will be labeled according to California Proposition 65.
e-XC pumps are ideal for pressure boosting and general pumping with these liquids:
• Groundwater
• Process water
• Gray water
• Sea water
• Brackish water
• Industrial fluids
• Heat transfer fluids
• Produced water
• Solvents
• Oil
• Boiler-feeder water
• Condensate
• Benign liquids
Note:
Pumps must be tailored for their intended application. Contact a sales representative
before attempting to change your pump application. Verify whether or not your current
pump configuration meets the requirements relevant to the new application.
Due to the wide variety of material options available for various components within the e-
XC product line, e-XC pumps may be suitable for other applications not specified in this
document. Contact a sales representative to verify if an e-XC pump can satisfy
requirements relevant to applications outside those listed in this document.
3.2 Operational limits
Maximum working pressure
Do not operate the pump at higher pressure thresholds than the maximum working
pressures listed on the pump nameplate.
3 Product Description
10 e-XC INSTRUCTION MANUAL
To Next Page
Loading...
Need help?
General
