Figure 34: Coupling guard parts
Legend Part Name
1 Coupler Guard Assembly Inner
2 Coupler Guard Assembly Outer
3 Guard Support Pump Side Left
4 Guard Support Pump Side Right
5 Guard Support Motor Side Left
6 Guard Support Motor Side Right
7 Guard Support Lower
8 Pedestal
9 Hex Bolt
10 Washer
11 Lock Washer
12 Hex Nut
13 Stiffener Clip
2. Assemble the pedestal [8] to the base frame. The pedestal feet should align with pre-
drilled holes in the base frame. In some cases, the coupling guard kit may not require a
pedestal. In these cases, the lower guard support [7] will be fixed directly to the base
frame or to a flat plate already mounted to the base frame.
3. Install the lower guard support [7] on top of each pedestal [8]. Secure the guard
support with the serrated hex bolt, hex nut, washer, and lock washer.
6 Maintenance
e-XC INSTRUCTION MANUAL 93
To Next Page
Loading...
