System Setup and Operation
Display and buttons
IP20 IP55, IP66
Symbol Name Description
On The button is used to start the drive
Navigate The button is used to enter/exit
(2 seconds) the menu and to confirm
selection/change (< 2 seconds).
Up The button is used to increase a value
or selection in the submenu.
Off The button is used to reset a tripped
drive and to stop the drive in manual
mode.
Down The button is used to decrease a value
or selection in the submenu.
Hand The button is used to enter the
manual mode.
Auto The button is used to enter the
automatic mode
During external I/O control the buttons On, Off, Hand, and Auto are disabled and remote
control has the priority.
3
The IP20 version does not have Hand and Auto buttons. If the function is needed the drive can be equipped with the H-0–A module or with the Optipad.
System Setup and Operation
SRC 311 - SmartRun
™
Installation, Operation, and Maintenance Manual 31
To Next Page
Loading...
