Introduction and Safety
Introduction
CAUTION:
• Read this manual carefully before installing and using the product. Improper use of
the product can cause personal injury and damage to property, and may void the
warranty.
• Observe accident prevention regulations in force.
• Save this manual for future reference, and keep it readily available at the location of
the unit.
Purpose of this manual
The purpose of this manual is to provide the necessary information for:
• Installation
• Operation
• Maintenance
Safety
Precautions
DANGER: Electrical Hazard
Before starting work on the unit, make sure that the unit and the control panel are isolated
from the power supply and cannot be energized. This applies to the control circuit as well.
WARNING: Electrical Hazard
Risk of electrical shock or burn. A certified electrician must supervise all electrical work.
Comply with all local codes and regulations.
CAUTION:
• The operator must be aware of safety precautions to prevent physical injury.
• You must observe the instructions contained in this manual. Failure to do so could
result in physical injury, damage, or delays.
Safety terminology and symbols
About safety messages
It is extremely important that you read, understand, and follow the safety messages and
regulations carefully before handling the product. They are published to help prevent
these hazards:
• Personal accidents and health problems
• Damage to the product
• Product malfunction
Introduction and Safety
SRC 311 - SmartRun
™
Installation, Operation, and Maintenance Manual 3
To Next Page
Loading...
