en - Original instructions
10 e-SV series - Installation, Operation and Maintenance Manual
NOTICE:
Do not place heavy loads on top of the unit.
NOTICE:
Protect the unit from collisions.
Long-term storage of the unit
1. Follow the same instructions for the storage of the packed unit.
2. Empty the unit by removing the drain plug. This operation is essential in exceptionally cold
environments; any residual liquid in the unit could otherwise have an adverse effect on its
condition and performance.
For further information about preparation for long-term storage, please contact Xylem or the
Authorised Distributor.
To Next Page
Loading...
